Maintaining, repairing, upgrading, commissioning, decommissioning topics.
Moderators: forumadmin, Vento Solare
- Posts: 4
- Joined: Tue Jun 30, 2020 12:42 pm
Can anyone tell me what the original mast top wind speed and direction sensor is? Make and Model? B and G? Mine has a round base, kind of bends forward at a low rise. Also, replacing the mast cable, is it free to run up and down or were the original cables zip tied together preventing a single cable from being pulled through?
J/109 Feleena model year 2003
- Posts: 308
- Joined: Wed Dec 31, 1969 8:00 pm
- Location: Newport, RI
Sorry to say that there is no "standard" wind sensor since instrument packages were not factory installed. The mast cables run through a PVC pipe attached to the inside of the mast. Running a new cable is best done with the mast down. Depending on what instrument s you have you may want to consider a wireless sensor if there is a cable problem. Something like the B&G WS320
- Posts: 27
- Joined: Sun Dec 07, 2014 9:18 pm
I replaced a broken Raymarine wired ST60 wind with a wireless Tacktick Wind Instrument.
I have a iMUX to interface the NMEA to Seatalk.
Happy to expand if its of interest.