Search found 20 matches
- Tue May 02, 2023 3:26 pm
- Forum: Sails & Equipment for Sale
- Topic: Sails to give away
- Replies: 6
- Views: 7276
Re: Sails to give away
I would be happy to hear about any light #1s or light 155% genoas you have.
- Tue Mar 14, 2023 2:45 pm
- Forum: Sails & Tuning
- Topic: Updates to 2004 tuning guide for 2003 hull ?
- Replies: 3
- Views: 5338
Re: Updates to 2004 tuning guide for 2003 hull ?
I saw that, thanks, mostly just wondered if there was any difference for the older hulls.
- Tue Mar 14, 2023 1:12 pm
- Forum: Sails & Tuning
- Topic: Updates to 2004 tuning guide for 2003 hull ?
- Replies: 3
- Views: 5338
Updates to 2004 tuning guide for 2003 hull ?
I have hull 34, a 2003 North American build and have finally set the mast base up as per the north 2004 tuning guide, i.e. 480 mm behind the bulkhead. I cannot shift it forward any more without pulling it and re drilling / tapping bolt holes in the mast step. Otherwise, my mast rake (headstay length...
- Tue Mar 14, 2023 1:04 pm
- Forum: Sails & Tuning
- Topic: Trying to measure mast rake - no black band
- Replies: 2
- Views: 5003
Re: Trying to measure mast rake - no black band
I can get you the black band measurement, but not til tomorrow.
do you have a 2003-4 build hull ? looks like you're using the 2004 uk north tuning guide ?
do you have a 2003-4 build hull ? looks like you're using the 2004 uk north tuning guide ?
- Fri Jan 14, 2022 12:36 pm
- Forum: Maintenance Topics
- Topic: propane solenoid failure ?
- Replies: 1
- Views: 3927
propane solenoid failure ?
Apparently, mine has failed. I have not taken it off yet, but its getting power and won't open, so no gas flow. Has anyone run into this or replaced this part ? Looks easy anyway. 2003 build.
Thanks.
Thanks.
- Fri Feb 14, 2020 2:53 pm
- Forum: Maintenance Topics
- Topic: cabin top hatch leak . ~ hull #34
- Replies: 1
- Views: 3648
cabin top hatch leak . ~ hull #34
I've been bothered by a slight cabin top hatch leak over the last 4-5 years. I finally took it off to rebed it. The hole in the cabin top is nicely finished off and gel coated through the thickness of the deck, so there is no worry about water ingress into the core (except through the screw holes of...
- Mon May 14, 2018 2:43 pm
- Forum: Sails & Equipment for Sale
- Topic: 120 sq m spinn wanted.
- Replies: 0
- Views: 4499
120 sq m spinn wanted.
seeking good condition sail for weeknight racing. thanks.
- Mon May 14, 2018 2:41 pm
- Forum: Maintenance Topics
- Topic: wheel cover, elk hide ?
- Replies: 3
- Views: 6320
Re: wheel cover, elk hide ?
found these guys too. http://boatleather.com/
- Wed May 09, 2018 2:39 pm
- Forum: Maintenance Topics
- Topic: wheel cover, elk hide ?
- Replies: 3
- Views: 6320
wheel cover, elk hide ?
any notion of where to get a replacement, looking like its close to time.
- Wed May 02, 2018 2:24 pm
- Forum: Maintenance Topics
- Topic: Lifeline replacement
- Replies: 4
- Views: 6764
Re: Lifeline replacement
I had synthetic on my j/33, 1/4 inch sampson dyneema. switched back. lots of inspection/maint headache. How frayed is too much ? how confident are you in 25/35 knots ? approximately yearly replacement. no thanks.
- Thu Dec 14, 2017 1:01 am
- Forum: Maintenance Topics
- Topic: Pre feeder for jib ?
- Replies: 1
- Views: 3952
Pre feeder for jib ?
Has anyone mounted a prefeeder on the jib foil? If so how, lashing? Screwed into the flat aft face?
- Fri Nov 17, 2017 5:14 pm
- Forum: Maintenance Topics
- Topic: genoa car block replacement
- Replies: 4
- Views: 7876
Re: genoa car block replacement
twice the weight nearly, but probably more robust
- Wed Nov 15, 2017 1:35 pm
- Forum: Maintenance Topics
- Topic: genoa car block replacement
- Replies: 4
- Views: 7876
Re: genoa car block replacement
I think I'll try the equivalent ronstan 40 mm fiddles. they have a metal strap.
- Tue Nov 14, 2017 2:51 pm
- Forum: Maintenance Topics
- Topic: genoa car block replacement
- Replies: 4
- Views: 7876
genoa car block replacement
I had Harken carbo 40 fiddle blocks on the forward ends of the genoa cars. Both broke across the smaller sheave this weekend in 25 or so knots gusts with the class jib up (and no barberhauler). Fortunately only one break was very explosive and the car did not come off the track, so we could jury rig...
- Fri Jun 16, 2017 1:35 pm
- Forum: Sails & Tuning
- Topic: windseeker for < 2 knots
- Replies: 0
- Views: 5590
windseeker for < 2 knots
Has anyone used a windseeker on 109s ? a very lite~ 90% free flying luff jib. mostly just works to create and direct some flow over the main. I had one for both a j/33 and 27 that worked very nicely, but haven't made one up for this boat yet.