Prop washer
Posted: Sun Jun 03, 2018 1:22 pm
When you replace the seals in your lower sail drive every two years (or if you take your prop off for other maintenance), you should replace the prop washer and locking screws.
If you have the flexfold 2 blade https://j109.org/docs/flexofold_install ... 0_2013.pdf, here is the place to order the parts from and the part numbers:
Hansen Marine Engineering
32 Tioga Way
PO Box 1106
Marblehead, MA 01945
781-631-3282
FF-Screw: Locking screw tappered M8x25 D (Qty 2, $10.45 each)
FF-Tab Washer: Locking Tab Washer (Qty 1, $5.50 each)
FF-V1007: Locking screw M8x20 mm (Qty 1, $4.95 each)
If you have the flexfold 2 blade https://j109.org/docs/flexofold_install ... 0_2013.pdf, here is the place to order the parts from and the part numbers:
Hansen Marine Engineering
32 Tioga Way
PO Box 1106
Marblehead, MA 01945
781-631-3282
FF-Screw: Locking screw tappered M8x25 D (Qty 2, $10.45 each)
FF-Tab Washer: Locking Tab Washer (Qty 1, $5.50 each)
FF-V1007: Locking screw M8x20 mm (Qty 1, $4.95 each)