Head Plumbing and Y-valve
Moderator: forumadmin
- Vento Solare
- Posts: 395
- Joined: Wed Dec 31, 1969 8:00 pm
- Location: Newport, RI
Re: Head Plumbing and Y-valve
I replied at 08:51 and answered yes to your question was the problem using a Jabsco joker valve rather than a Raritan. You edited your post at 08:52 and removed the question. The Yes answer stands - Get a Raritan joker valve.
-
- Posts: 280
- Joined: Sun Jan 29, 2017 4:32 pm
Re: Head Plumbing and Y-valve
Practical sailor magazine lead me to believe all these are equal.
https://www.practical-sailor.com/system ... rine-heads
Other potential clues:
* It only seems to siphon only when set to overboard, and not when set to holding tank.
* The holding tank unexpectedly filled up, perhaps siphoned water into the boat somehow?
https://www.practical-sailor.com/system ... rine-heads
Other potential clues:
* It only seems to siphon only when set to overboard, and not when set to holding tank.
* The holding tank unexpectedly filled up, perhaps siphoned water into the boat somehow?
- Vento Solare
- Posts: 395
- Joined: Wed Dec 31, 1969 8:00 pm
- Location: Newport, RI
Re: Head Plumbing and Y-valve
You have "pumping" action when the boat is set to overboard as the wave action causes differential pressure. The joker valve is shot - replace it.