Page 1 of 1
Table Pieces Help Please
Posted: Sun Dec 22, 2024 10:18 am
by Will1552
Good morning fellow sailors. I need some help. I am missing the two pieces for the top of my table and wonder is someone could measure and send me some photos and measurements so I can reproduce them. The middle piece for the bottle/liquor storage is easy, what I really need is photos and measurements of the separate piece that goes around the mast at the front top of the table and how it is built. Would any of you be able to help me out?
I attached a photo to help show what I am looking for.
Merry Christmas to all of you, I hope Santa brings you cool stuff for your boats.
Re: Table Pieces Help Please
Posted: Sun Dec 22, 2024 10:19 am
by Will1552
Sorry for the second note. My boat is a USA Built boat.
Re: Table Pieces Help Please
Posted: Mon Dec 30, 2024 11:51 am
by Phoenix251
Got you covered. I will be heading to boat today and will post photos/measurements tonight. Standby.
Re: Table Pieces Help Please
Posted: Mon Dec 30, 2024 11:55 am
by Will1552
Thank you!! I appreciate your help. I am missing both pieces, the liquour box top as well if you remember, if not, that one is easier to guess on ha
!
Chris
USA 359
Re: Table Pieces Help Please
Posted: Tue Dec 31, 2024 2:35 pm
by Phoenix251
Ok, got it. It will be hard to make sense of the measurements from just the pictures, but you should be able to match things up with the more exact measurements. They are 15 1/2, 12 3/4, 9 3/16, 4 1/4, 8 3/4, 7 3/4, and 7. Standby for center insert.
Best
Matt
Phoenix 251
Re: Table Pieces Help Please
Posted: Tue Dec 31, 2024 2:39 pm
by Phoenix251
Photos part 2 - forgot to measure height and height of the forward lip/trim piece, but photo attached. Trim piece is probably an inch.
Re: Table Pieces Help Please
Posted: Wed Jan 01, 2025 9:04 pm
by Will1552
Wow, great photos and measurements. This will help a lot! thanks Matt.
Chris
BombShell USA 359
Re: Table Pieces Help Please
Posted: Thu Jan 02, 2025 2:52 pm
by Phoenix251
My center insert is a bit “modified” and original is in storage, but dimension are the same. L 20 3/4, W 4 3/16, H is about 3/4.
Probably best to assume that all tables have small differences, but this should get you close. Have fun building!
BTW, there is a prior post on varnish. Epifanes Rubbed Effect is a good match.
Re: Table Pieces Help Please
Posted: Fri Jan 03, 2025 10:34 pm
by Will1552
Matt Thanks Again for the great photos. I also like the tip on Epithanes and have some coming.
Re: Table Pieces Help Please
Posted: Sat Mar 29, 2025 4:02 pm
by Will1552
Matt, circling back as I am finishing these now before lauch comes in 5-6 weeks....
Did you convert your liquor top to a bottle holder or can holder?
Chris
Re: Table Pieces Help Please
Posted: Mon Apr 07, 2025 4:59 pm
by Phoenix251
Hi Chris,
Converted for cans. I have the original in storage. Can get a photo of original if needed. I have found that mounting a shoe/storage holder on the mast with zip ties works really well for a Nalgene holder (for Macs).
https://a.co/d/5jh90hm
Matt