Maintaining, repairing, upgrading, commissioning, decommissioning topics.
Moderators: forumadmin, Vento Solare
- Posts: 256
- Joined: Wed Dec 31, 1969 8:00 pm
- Location: Newport, RI
This post is to let people know that the Harken winch drums may be resurfaced when they wear and become "slippery". I contacted the local Harken folks in Newport, RI and the cost is about $100 per winch. The winch drums should be removed, all connected pieces on the drum disassembled (self tailer, stripping arm, red trim ring and composite cover press-fit at the bottom of the drum). The drums should be degreased before return. I used a citrus degreaser and warm water - it worked fine.
The resurfaced drums were sent to the Harken factory in Wisconsin and returned to me in 3 weeks, so this is a good off season project. It is a great time to totally disassemble, clean and service your winches too. The returned drums have a newly restored gripping surface that works well with the lines.
Contact Harken to schedule your winch drums for resurfacing. The Newport office is (401) 849-8278